Jebao SLW-10 Wave Maker Wide Flow 4000 Liters

Jebao Wave Maker SLW-10 Wave Maker

Jebao wave makers are well designed to stimulate the reef environment in your aquarium 

• The DC wavemaker sllows a variable flow rate of 500-4000 lph which stimulated multiple wave patters
• Any 2 or more Jebao pumps could be wirelessly synchronized and operated enabling one controller to operate all wavemakers.
• Easy assembly and dissembly dor maintainence
• 3D Wide flow ideal for smaller nano tanks
• Small Profile, Strong power
• Multiple wave pattern modes including variable pulse modes for wave generation and a Reef Stream mode that generates a random flow pattern.
• DC 24V low voltage operation, safe and reliable
• Silent operation

 Specification:

• Input Voltage – 100V to 240V 50/60Hz
• Power – 10W to 20W depending on the mode
• 8 different flow rates 500-4000L/H (130-1000G/H)
• Pump Size – 7.6cm x 5cm x 5cm
• Power cable – 100cm long from power source to control box
• recommend for 20-100L tank (5-25 gallon)

Package includes

• 1 x 20 watts pump
• 1 x controller
• 1 x transformer (100-240V)
• 1 x magnet base

Function Description
Wireless controller is defined to allow operation without the wire among wave makers.

MASTER Control：Press “Wi-Le” once and enter into Master control when “Master” indicator lights. Master controller can operate all the functions for the Slave Control: Press“ Wi-Le” until the “Salve” indicator lights and enter into Slave mode , where all operation is invalid except adjusting flow rate by rotate the knob.

Among two or more wave makers, set one as the Master and the others as Slave. You can achieve the same function and operation for all the pumps by adjusting the Master controller.

Description of Wave Modes

W1：Wave Mode 

Remoting the knob is necessary when operate this mode to adjust the wave patterns among one or more pumps at the same time. As the volum of water in tank is different from the capacity of the tank, wave period needed to be adjusted by switching the knob. The wave is biggest when wave length turn to be same as the length of tank; Increase the wave length by switching the knob in clockwise, and reduce in anti clockwise.

Tips: You should switch the knob gradually and notice the wave pattern in a certain period after each adjustment.Press “SPEED/FEED”to adjust the flow rate.

W2： Sine Mode  

One or more pumps can operate at the same time in this mode. The power various between 30%-100% and the regulation looks like a sine curve.

Else： Random Mode 

One or more pumps can operate at the same time. It is a random mode as the power of pump is changing to a random data all the time without regulation.

H：Flow Mode 

One or more pumps can operate at the same time. In constant flow. Flow rate can be adjusted by “SPEED/FEED”

C： Shift to flow mode

Two pumps are needed to be operated at the same time, when they shift wave and flow in cycles. P1 work, P2 stop;P2 work, P1 stop;P1 work, P2 stop. and cycles like this. Cycle period （1s-1min）can by adjusted by switching the knob and adjust the flow rate by pressing SPEED/FEED

Night Function: Enter into Night Mode by long press-down MODE/NIGHT” button until yellow “NIGHT” indicator lights. It works normally during day time and enter into NIGHT mode automatically when it’s dark, when the water flows at the least speed. Quit the mode by long press down”NIGHT” button until the yellow indicator dims

FEED Function: Long press down “SPEED/FEED” button until the blue indicator light, and the pump stops working and allow fish to eat for 10 min. and back to normal mode after that. If need to return back to work during feeding, just long press down the SPEED/FEED button until the “10min”indicator dims.

Knob Locking Function: Long press the Wi-Le/LOCK button until the red LOCK indicator light, which shows the setting is locked. Wave patterns and shift time is fixed without change. It prevents the wave pattern and time to be changed if adjust the knob or button on no prupose.